Installation Guide

PREPARATION
INSTALLATION INSTRUCTIONS
Estimated Installation Time: 20-30 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone caulk,
power drill with drill bit
Helpful Tools (not included): Measuring tape, level
3
1
1
2
WARNING: Vanity (A) must be secured to wall.
B
A
A
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Note: Clean area where the vanity (A) will be permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any water supply and drain lines once mounted. Make
sure to use appropriate silicone caulk (not included) to adhere ceramic to your installation site.
1. Remove and discard the plastic zip ties that hold
the top (B) to vanity (A). Remove top (B)
and set aside.
2. Mark spots on the wall where vanity (A) will be
located. With the help of another adult, carefully
place vanity (A) against the wall in its final location.
Using mounting hardware (not included), secure
vanity (A) through mounting bar into at least one
wall stud.