Installation Guide

Installing Porcelain Tile
Page 4 of 4
Allow the grout to sit for approximately 15 to 20 minutes, then use a damp sponge to clean any
residue from the surface and smooth the grout joints.
Make sure to rinse your sponge often and change the water as needed.
Polish with a soft cloth when the grout has dried and haze forms on the tile surface, then rinse
again with a damp sponge and clean water if necessary. The newly grouted floor will need to
cure for approximately 72 hours before any heavy use and at least three weeks before applying
sealers or polishes.
**These are basic installation instructions which do not fully encompass all installation
scenarios. Additional instructions and support is available through the Tile Council of North America
website at:
http://www.tcnatile.com/contact-us.html