How to Guide

OPERATING INSTRUCTIONS

Lowes.com

Timer Button

• The timer button should be used to set the countdown for the unit's main power.

• If the unit is powered OFF, you can press the timer button to power ON the unit. The emberbed

will glow at the lowest brightness setting unless a different setting was saved in the memory.

• Press the timer button again to scroll through the timer settings, which are: 30, 1h, 2h, 3h, 4h, 5h,

6h, 7h, 8h, 9h and OFF.

• When the timer reaches zero, it will turn OFF the main power and will maintain the settings in

memory.

Memory Function

• When the unit is powered OFF, all function settings (excluding timer) will be saved.

• When the unit is OFF, pressing the power button once on the insert control panel or on the remote

control will turn the unit ON and "wake up" the saved function settings.

• When the unit is OFF, press any function button to "wake up" the individual function at the last

saved setting. Press the button again to adjust it and press the main power button on the insert or

on the remote control to turn the unit OFF and save the new setting into memory.

• When the unit is powered ON, the LED will show the saved temperature setting. If a temperature

setting was not saved, it will show the ame brightness setting saved in memory. If neither one has

a setting saved to memory, then only the emberbed will glow (as a power light indicator).

• To reset the memory, hold down the main power button for 5 seconds at any time. When this

happens, the LED readout will blink with four zeros three times.

• Another way to reset the memory is to unplug the unit from the wall.

Heater Override Switch

This appliance has a rocker

switch located on the back of

the body (A). This switch will

override power to the heater to

prevent the heater from being

accidentally or unintentionally

powered on. This feature is

primarily added to help prevent

children from powering on the

heater when it is not desired.

To use the remote control,

first remove the plastic tab

by gently pullling.

Heater Power

OFF