StyleCrest Installation Manual

ManualsBrandsStyle Crest ManualsMobile Home FurnacesRevolv MG1E 80% 77,000 BTU Mobile Home Gas Furnace with Coil Cabinet

INSTALLATION CHECKLIST

Speciﬁcations & illustrations subject to change without notice or incurring obligations (08/19).

ELECTRICAL SYSTEM

Electrical connections tight? YES NO

Line voltage polarity correct? YES NO

Supply Voltage: ________________________________ VOLTS

Has the thermostat been calibrated? YES NO

Is the thermostat level? YES NO

Is the heat anticipator setting correct? YES NO

GAS SYSTEM

Gas Type: (circle one)

Natural

Gas

Propane

Gas pipe connections leak-tested? YES NO

Gas Line Pressure: ........................................................ (in - W.C.)

Installation Altitude:............................................................(FT.)

Deration Percentage: ......................................................... (%)

Furnace Input:....................................................................(Btuh)

Supply Air Temperature: ................................................... (° F)

Return Air Temperature: ...................................................(° F)

Temperature Rise: ............................................................(° F)

COMBUSTION AIR & VENTING SYSTEM

Is there adequate fresh air supply

for combustion & ventilation?

YES NO

Vent free from restrictions? YES NO

Filter(s) secured in place? YES NO

Filter(s) clean? YES NO

Flue connections tight? YES NO

Is there proper draft? YES NO

INSTALLATION ADDRESS:

CITY: STATE:

UNIT MODEL #

UNIT SERIAL #

Unit Installed Minimum clearances

per Table 1, (page 5)?

YES NO

INSTALLER NAME:

CITY: STATE:

Has the owner’s information been

reviewed with the customer?

YES NO

Has the Literature Package been

left with the unit?

YES NO

ATTENTION INSTALLERS:

It is your responsibility to know this product better than your customer.

This includes being able to install the product according to strict

safety guidelines and instructing the customer on how to operate

and maintain the equipment for the life of the product. Safety should

always be the deciding factor when installing this product and using

common sense plays an important role as well. Pay attention to

all safety warnings and any other special notes highlighted in the

manual. Improper installation of the furnace or failure to follow safety

warnings could result in serious injury, death, or property damage.

These instructions are primarily intended to assist qualiﬁed individuals

experienced in the proper installation of this appliance. Some local

codes require licensed installation/service personnel for this type of

equipment. Please read all instructions carefully before starting the

installation. Return these instructions to the customer’s package for

future reference.

1027149A

(Replaces 10271490)