Manual
Table Of Contents
- Model 5401A Dante Leader Clock
- Table of Contents
- Revision History
- Introduction
- Installation
- Dante Configuration
- Model 5401A Configuration
- Operation
- Technical Notes
- Specifications
- Appendix A–Compatible Sync Input Sources
- Appendix B–Network Configuration Examples
- Appendix C–Dante Controller Network Default Configuration Values
- Appendix D–Menu Structure
- Appendix E–Screen Captures
- Appendix F–Model 5401A Default Configuration Values
- Appendix G–PTPv2 (IEEE® 1588-2008) Default Characteristics
- Appendix H–Accessing the Unit when User Name and/or Password are Not Known
Issue 2, July 2021 Model 5401A User Guide
Page 46 Studio Technologies, Inc.
Connectors:
Sync Input, Word Clock Output:
2, BNC jack (female
connector), per IEC 61169-8 Annex A
Ethernet: 3, RJ45 jack
USB: type A receptacle (used only for updating
firmware)
DC Input: 4-pin male XLR (pin 1 negative, pin 4
positive)
AC Mains Input: 3-blade male, IEC 320 C14-
compatible (mates with C13)
Environmental:
Operating Temperature:
0 to 50 degrees C (32 to
122 degrees F)
Storage Temperature:
–40 to 70 degrees C (–40 to
158 degrees F)
Humidity: 5 to 95%, non-condensing
Altitude: not characterized
Dimensions (Overall):
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
7.9 inches deep (20.1 cm)
Mounting: one space (1U) in a standard 19-inch rack
Weight: 3.0 pounds (1.4 kg)
Specifications and information contained in this
User Guide subject to change without notice.