Manual

Issue 2, July 2021 Model 5401A User Guide
Page 36 Studio Technologies, Inc.
lock icon will show in the upper-right corner
of the display.
Whenever the IP address configuration is
selected for Manual the manual IP address
can be modified as desired. This will be
indicated by a circle with arrows icon that
will show in the upper-right corner of the
display. To start the process of changing the
manual management IP address press the
Enter pushbutton switch on the front panel.
An icon with a wrench and screwdriver will
display to indicate that an edit is in process.
Use the left and right arrow pushbutton
switches to select which specific digit of
the IP address number is to be modified.
Press the up and down arrow pushbuttons
to select the desired number. The standard
dot-decimal notation is used to display and
revise the IP address. Once all the desired
changes have been made press the Enter
button to store them.
To cause the Model 5401A to use a new
setting requires that the unit be rebooted
(restarted). This can be performed using
another front-panel menu page, using a
function on a management webpage, or by
power cycling the unit. Restoring the Model
5401A to its default values will not change
the stored manual IP address.
Manual Management Subnet Mask Value:
This menu page shows the stored subnet
mask value associated with the connection
used to access the management web serv-
er. (This value has nothing to do with the
subnet mask values utilized by the Dante
primary and Dante secondary ports.) It will
be utilized only when the manual mode has
been selected for the management IP ad-
dress configuration. When the IP address
configuration has been selected for Auto-
matic this field cannot be changed and a
lock icon will show in the upper-right corner
of the display.
Whenever the IP address configuration is
selected for Manual the manual manage-
ment subnet mask value can be modified
as desired. This will be indicated by a circle
with arrows icon that will show in the up-
per-right corner of the display. To start
the process of changing the subnet mask
value press the Enter pushbutton switch
on the front panel. An icon with a wrench
and screwdriver will display to indicate that
an edit is in process. Use the up and down
arrow pushbutton switches to select the de-
sired subnet mask value. Once the desired
value has been selected press the Enter
button to store it.
To cause the Model 5401A to use a new
manual management subnet mask value re-
quires that the unit be rebooted (restarted).
This can be performed using another front-
panel menu page, using a function on a
management webpage, or by power cycling
the unit. Restoring the Model 5401A to its
default values will not change the stored
subnet mask value.
Row Three
Row three has a total of six menu pages.
Four of the menu pages relate to the Dante
primary interface with three of these allow-
ing both display and configuration changes
to be made. The fifth menu page allows the
configuration of the Ethernet switch inte-
grated circuit to be displayed. A sixth menu
page allows the Dante interface to be re-
booted (restarted).
Dante Device Name: The Dante de-
vice name is shown on this menu page.
This name is unique to each device in a
Dante deployment and is used as part of
the Dante subscription (channel routing)
process. The name can be changed from
within the Dante Controller application. The
text shown on this menu page is same as
is shown in the upper-right corner of each
Model 5401A management webpage.