Datasheet

Future Capabilities and Firmware
Updating
The Model 5205 was designed so that its capabilities and
performance can be enhanced in the future. A USB connec
-
tor, located on the unit’s back panel, allows the application
firmware (embedded software) to be updated using a USB
flash drive.
Studio Technologies, Inc. Model 5205 Interface, Issue 2, Page 3
Specifications
Network Audio Technology:
Type: Dante Audio-over-Ethernet
Number of Dante Transmit (Output) Channels: 2
Bit Depth: 24
Sample Rates: 44.1, 48, 88.2, and 96 kHz
Number of Dante Transmitter (Output) Channels: 2
Dante Audio Flows: 2 transmitter
Analog to Digital Equivalence: a +4 dBu input with 0 dB
gain selected results in a Dante digital output level of
–20 dBFS
Network Interface:
Type: twisted-pair Ethernet with Power-over-Ethernet
(PoE)
Data Rate: 100 Mb/s (10 Mb/s Ethernet not supported)
Power:
Power-over-Ethernet (PoE) per IEEE 802.3af
class 2 (low power,
≤6.49 watts)
General Audio Parameters:
Frequency Response (48 kHz Sample Rate):
+0.0/–0.5 dB, 20 Hz to 22 kHz
Frequency Response (96 kHz Sample Rate):
+0.0/–0.5 dB, 20 Hz to 40 kHz
Distortion (THD+N): 0.001% (–100 dB) at –1 dBFS,
40 dB gain, 22 kHz bandwidth
Dynamic Range: >114 dB, 0 dB gain, A-weighted
EIN: –123 dBu, 22 kHz bandwidth, 60 dB gain, 150 ohm
source resistance
IMD (SMPTE): <0.002%, 60 Hz/7 kHz, 4:1, –20 dBFS
To implement the Dante interface the Model 5205 uses
Audinate’s Ultimo™ integrated circuit. The firmware in this
integrated circuit can be updated via the Ethernet connection,
helping to ensure that its capabilities remain up to date.
Mic/Line Inputs: 2
Type: electronically balanced
Input Impedance: 3.7 k ohms
CMRR: >75 dB, 20 Hz to 22 kHz, 40 dB gain
Gain, Nominal (Button Selected): 0 (line), 20, 30, 40,
50, and 60 dB
Gain, Actual (Button Selected): 0 (line), 19, 31, 40, 49,
and 61 dB
Gain (Remote Control Selected): 0 dB (line), 10 dB,
19-70 dB in 3-dB steps
Compatibility: dynamic, ribbon, or phantom-powered
mics
Phantom Power: P48 per IEC 61938 standard, +45 volts
DC nominal, on/off selectable
Remote Configuration Capability: preamplifier
gain and P48 phantom power on/off status (uses
STcontroller application)
Meters: 2
Function: displays level of Dante transmitter (output)
signals
Type: 8-segment LED, modified VU ballistics
Connectors:
Mic/Line Inputs: 3-pin female XLR
Ethernet: Neutrik etherCON RJ45
USB: type A receptacle
Dimensions (Overall):
4.2 inches wide (10.7 cm)
1.7 inches high (4.3 cm)
5.1 inches deep (13.0 cm)
Mounting Option: bracket kit
Weight:
0.8 pounds (0.35 kg)
Specifications subject to change without notice.
Studio Technologies, Inc.
Skokie, Illinois USA
© by Studio Technolog
ies, Inc., August 2017
studio-tech.com