Datasheet

50279-0817, Issue 2
Key Features
• Dante Audio-over-Ethernet technology
• Two analog mic/line inputs to Dante digital audio outputs
• Selectable preamplifier gain and P48 phantom power
• Audio channel level metering
• Excellent audio quality
• Power-over-Ethernet (PoE) powered
• Standard connectors; compact, lightweight design
Introduction
The Model 5205 Mic/Line to Dante Interface is a general-
purpose audio device that supports applications utilizing the
Dante™ Audio-over-Ethernet media networking technology.
Two analog microphone or line-level audio signals can be
connected to the Model 5205. They are amplified as required
and then converted to digital audio channels on an associated
Dante connection. With the inherent interoperability of Dante,
the Model 5205 can be used with other Studio Technologies
Dante-enabled products or a multitude of devices from many
other manufacturers.
Microphone or line-level balanced analog audio signals are
connected using two 3-pin XLR connectors. The gain of the
associated preamplifier circuitry can be selected for 0, 20,
30, 40, 50, or 60 dB. P48 phantom power is provided to sup
-
port condenser microphones. LEDs display the status of the
gain and phantom power functions. Multi-step LED meters
provide confirmation of the level of the two Dante transmitter
(output) audio channels.
The gain of the preamplifiers and on/off status of the P48
phantom power sources can be selected locally using the
pushbutton switches. They can also be monitored and selected
remotely using the STcontroller application.
The audio quality of the Model 5205’s two audio channels is
excellent, with low distortion, low noise, and high headroom.
Careful circuit design and rugged components ensure long,
reliable operation. A wide range of applications can be sup
-
ported, including TV, radio, and streaming broadcast events,
corporate and government AV installations, and post-produc
-
tion facilities.
The Model 5205 requires an Ethernet connection to supply
both the data interface as well as Power-over-Ethernet (PoE)
power. This requires an Ethernet connection from a PoE-
enabled Ethernet switch. Alternately, the Model 5205 can
be powered by an external midspan PoE power injector.
Applications
The Model 5205 is perfect for use in conjunction with a variety
of fixed and portable audio applications where one or two
analog audio signals need to join a Dante “network.” The unit’s
high-performance audio circuitry allows virtually any source
to be handled correctly. Essentially all condenser, dynamic, or
ribbon microphones are compatible, as are most balanced and
unbalanced analog line-level sources. The simple user controls,
along with an extensive set of status indicators, help to ensure
optimum performance is maintained. With the unit’s compact
size and PoE powering, it’s simple to deploy multiple units to
integrate a distributed set of sources into a Dante application.
For permanent applications there’s no reason why a Model
Model 5205 Interface
Mic/Line Input to Dante™