Manual

Issue 2, August 2015 Model 5204 User Guide
Page 14 Studio Technologies, Inc.
Model 5204
Dual Line Input to Dante Interface
Identifying the Firmware
Version Number
As previously discussed in this guide,
upon power up the meter LEDs are used
to briefly display the version number of
the Model 5204’s firmware (embedded
software). This information is typically only
necessary when working with the fac-
tory on support issues. The meter LEDs
will first go through a display sequence
followed by an approximately 1-second
period where the version number will be
indicated. The top row of seven LEDs will
display the major version number with a
range of 1 to 7. The bottom row of seven
LEDs will display the minor version number
with a range of 1 to 7. Refer to Figure 2 for
details.
Figure 2. Detail of front panel showing the LEDs that display the firmware version.
In this example, the version shown is 1.3.
Major Version Number
1 2 3 4 5 6 7
O O O O O O
O O O O O O
.1 .2 .3 .4 .5 .6 .7
Minor Version Number