Datasheet

Model 5202 Interface 50275-0814, Issue 1, Page 3
Studio Technologies, Inc.
Skokie, Illinois USA
© by Studio Technolog
ies, Inc., August 2014
www.studio-tech.com
Model 5202 Specifications
Network Audio Technology:
Type: Dante Audio-over-Ethernet
Bit Depth: up to 24
Sample Rates: 44.1, 48, 88.2, and 96 kHz
Number of Receiver (Input) Channels: 2
Dante Audio Flows: 2 receiver
Digital to Analog Equivalence: at unity gain a Dante
digital input of –20 dBFS results in an analog output
of +4 dBu
Network Interface:
Type: twisted-pair Ethernet with Power-over-
Ethernet (PoE)
Data Rate: 100 Mb/s (10 Mb/s Ethernet not
supported)
Power: Power-over-Ethernet (PoE) per IEEE 802.3af
class 1 (very low power,
≤3.84 watts)
General Audio Parameters:
Frequency Response: 20 Hz to 20 kHz, ±0.5 dB,
Dante to line output
Distortion (THD+N): 0.01%, measured at 1 kHz,
+4 dBu, Dante to line output
Dynamic Range: >100 dB, A-weighted, Dante
to line output
Headphone Output:
Type: stereo, configured to drive headphones through
100 ohm series resistors
Compatibility: intended for connection to headphones
with impedance of 100 ohms or greater
Level: adjustable using rotary level control
Maximum Voltage: 8 Vpp, 100 ohm load
Line Outputs: 2
Type: electronically balanced, capacitor-coupled,
intended to drive balanced or unbalanced loads of
2 k ohms or greater
Source Impedance: 200 ohms
Nominal Level: adjustable using rotary level control,
+4 dBu @ 100% rotation
Maximum Level: +24 dBu into 2 k ohms
Meters: 2
Function: displays level of Dante input signals
Type: 7-segment LED, modified VU ballistics
Connectors:
Ethernet: Neutrik etherCON RJ45
Headphone Output: 3.5 mm and ¼-inch 3-conductor
jacks
Line Outputs: 3-pin male XLR
Dimensions (Overall):
4.2 inches wide (10.7 cm)
1.7 inches high (4.3 cm)
5.1 inches deep (13.0 cm)
Mounting Option: bracket kit
Weight:
0.8 pounds (0.35 kg)
Specifications subject to change without notice.