Datasheet

ManualsBrandsSTUDIO TECHNOLOGIES ManualsNetwork Audio + VideoModel 48D Dante Bridge - Connects 4-ch Audio between 2 Separate Networks

Studio Technologies, Inc. Model 48D Dante Bridge, Issue 1, Page 4

Studio Technologies, Inc.

Skokie, Illinois USA

ies, Inc., July 2018

studio-tech.com

Model 48D Specifications

Power Sources:

Power-over-Ethernet (PoE): class 1 (low power, ≤3.84

watts) per IEEE® 802.3af

External: 10 to 18 volts DC, 0.15 A maximum (can be

Network Interfaces: 2

Type: 100BASE-TX, twisted-pair Ethernet, Power-over-

Ethernet (PoE) supported

Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s “GigE”

not supported)

Network Audio Technology (each Network

Interface):

Type: Dante audio-over-Ethernet

AES67-2013 Support: yes

Dante Domain Manager (DDM) Support: yes

Bit Depth: up to 24

Sample Rate: 44.1, 48, 88.2, 96 kHz

Number of Transmitter (Output) Channels: 4 (44.1 and

48 kHz sample rate), 2 (88.2 or 96 kHz sample rate)

Number of Receiver (Input) Channels: 4 (44.1 and 48

kHz sample rate), 2 (88.2 or 96 kHz sample rate)

Dante Audio Flows: 4; 2 receiver, 2 transmitter

Audio Performance:

Type: fully-digital paths between network interfaces

(by way of sample-rate-converter integrated circuits)

Dynamic Range: 147 dB at 48 kHz sample rate, 148

at 96 kHz sample rate, A-weighted

Distortion (THD+N): –140 dB at 48 kHz sample rate,

–143 dB at 96 kHz sample rate, measured at –1 dBFS,

1 kHz

Connectors:

Ethernet: Neutrik NE8FBH etherCON RJ45 receptacles

External DC: 4-pin male XLR

USB: type A receptacle (used only for main firmware

updates)

Environmental:

Operating Temperature: 0 to 50 degrees C (32 to

122 degrees F)

Storage Temperature: –40 to 70 degrees C (–40 to

158 degrees F)

Humidity: 0 to 95%, non-condensing

Altitude: not characterized

Dimensions – Overall:

8.7 inches wide (22.1 cm)

1.72 inches high (4.4 cm)

8.3 inches deep (21.1 cm)

Mounting Options: single-unit (RMBK-11) and

dual-unit (RMBK-12) rack-mounting installation kits

(purchased separately) use one space (1U) in a stan

dard 19-inch rack

Weight: 1.8 pounds (0.80 kg); rack-mounting installa-

tion kits add 0.2 pounds (0.09 kg)

Specifications subject to change without notice.