Manual

Issue 1, April 2019 Model 372A User Guide
Page 20 Studio Technologies, Inc.
MODEL 372A
INTERCOM BELTPACK
The STcontroller software application can
also be used to identify Ultimo’s firmware
version. (Use the Version selection under
the Device tab.) The Ultimo firmware can
be updated by way of the Model 372A’s
Ethernet connection. The latest Ultimo firm-
ware file is available on the Studio Technolo-
gies’ website. The Dante Firmware Update
Manager (FUM) application program has
traditionally been used to install the Ultimo
firmware. The Dante Controller software ap-
plication also includes an automated method
of updating Ultimo firmware. Both applica-
tions are available, free of charge, on the
Audinate website (www.audiante.com).
Restoring Factory Defaults
A command in the STcontroller software ap-
plication allows the Model 372A’s configura-
tion to be reset to the factory default values.
From STcontroller select the Model 372A for
which you want to restore its defaults. Select
the Device tab and then select the Factory
Defaults feature. Then click on the OK box.
Refer to Appendix A for a list of the Model
372A’s factory default values.