User Guide

Issue Preliminary 1, August 2021 Model 354 User Guide
Page 20 Studio Technologies, Inc.
Model 354
TALK STATION
Channel Status Signals:
Action: independently configurable per channel
Send Tone Frequencies:
16, 18, and 20 kHz,
sine-wave
Send Tone Frequency Accuracy:
<10 ppm
Send Tone Level:
–20 dBFS, nominal
Send Tone Distortion:
<0.0001%
Receiver Tone Detect Level Threshold:
–23 dBFS
at 16 kHz; –28 dBFS at 18 kHz; –30 dBFS at 20 kHz
Receiver Tone Minimum On Time:
80 milliseconds
Program Input-to-Monitor Output Low-Pass
Filter: –6 dB at 10 kHz; –28 dB at 16 kHz; –55 dB
at 20 kHz
Tone Detect Tone-to-Monitor Output Rejection
Filter: –31 dB at 18 kHz; –46 dB at 20 kHz; –70 dB
at 22 kHz
Connectors:
Gooseneck Microphone: ¼-inch 3-conductor with
7/16-20 UNF threaded bushing; 4-40 hex head
socket set screw allows microphone to be secured
into bushing
Analog Monitor Output: 3-pin male XLR
Ethernet: Neutrik NE8FBH etherCON RJ45 jack
USB: type A receptacle (used only for updating main
firmware and WAV audio files)
Configuration: Studio Technologies’ STcontroller
personal computer application
Software Updating: USB flash drive used for
updating main firmware and WAV audio files; Dante
Controller’s Dante Updater application used for
updating Dante interface firmware
Environmental:
Operating Temperature:
0 to 50 degrees C (32 to
122 degrees F)
Storage Temperature:
–40 to 70 degrees C (–40 to
158 degrees F)
Humidity: 0 to 95%, non-condensing
Altitude: not characterized
Dimensions:
3.6 inches wide (9.1 cm)
2.7 inches high (6.9 cm)
4.7 inches deep (11.9 cm)
Deployment: intended for tabletop applications
Weight:
1.1 pounds (0.50 kg) without gooseneck
microphone; 1.4 pounds (0.64 kg) with GME-3-12
gooseneck microphone
Specifications and information contained in this
User Guide subject to change without notice.