Manual

Issue 1, January 2020 Model 348 User Guide
Page 34 Studio Technologies, Inc.
MODEL 348
INTERCOM STATION
Connectors:
Headset A: 5-pin female XLR
Headset B: 3.5 mm 4-conductor TRRS jack, per
Japanese standard JEITA/EIAJ RC-5325A
Gooseneck Microphone: ¼-inch 3-conductor with
7/16-20 UNF threaded bushing; 4-40 hex head socket
set screw allows microphone to be secured into bushing
Ethernet:
Neutrik NE8FBH etherCON RJ45 receptacles
External DC: 4-pin male XLR (pin 1 negative, pin 4
positive)
USB: type A receptacle (used only for updating
firmware)
Configuration: requires Studio Technologies’
STcontroller software application, version 2.06.00
and later
Environmental:
Operating Temperature: 0 to 50 degrees C (32 to
122 degrees F)
Storage Temperature: –40 to 70 degrees C (–40 to
158 degrees F)
Humidity: 0 to 95%, non-condensing
Altitude: not characterized
Spare Connector Location: 1
Allows a Studio Technologies’ cable assembly or op-
tion module to be installed. Also compatible with Neutrik
NC*D-L-1 connectors (*=3F, 3M, 5M, 6F, 6FS, etc.).
Dimensions (Overall):
6.5 inches wide (16.5 cm)
2.9 inches high (7.4 cm)
4.9 inches deep (12.5 cm)
Deployment: intended for tabletop applications
Weight: 2.1 pounds (0.95 kg)
Specifications and information contained in this
User Guide subject to change without notice.