Manual

Model 348 User Guide Issue 1, January 2020
Studio Technologies, Inc. Page 13
MODEL 348
INTERCOM STATION
Installing STcontroller
STcontroller is available free of charge on the
Studio Technologies’ website (www.studio-
tech.com/stcontroller-application/) and is
compatible with personal computers running
Windows operating systems that are version
7 and later. STcontroller versions 2.05.00 and
later are required to fully support the Model
348. If required, download and install STcon-
troller onto a designated personal computer.
This personal computer must be on the same
local area network (LAN) and subnet as the
Model 348 units that are to be configured. Im-
mediately after starting STcontroller the appli-
cation will locate all the Studio Technologies’
devices that it can control. The one or more
Model 348 units to be configured will appear
in the device list. Use the Identify command
to allow easy recognition of a specific Model
348 unit. Double-clicking on a device name
will cause the associated configuration menu
to appear. Review the current configuration
and make any changes that are desired.
Parameters
The configurable functions include:
General menu page:
• Microphone Input – Headset Mic Power
• Microphone Input – Headset Mic Gain
• Microphone Input – Gooseneck Mic Gain
• Headset – Sidetone Level
• Headset – Dim
• Speaker – Source
• Speaker – Dim
• Dante Monitor Outputs – Mode
• Dante Monitor Outputs – Dim
• System – Level Control Position Display
• System – Signal Present Display
• System – LED Intensity
• System – Headset and Monitor Outputs
Follow Mic Source
• System – Hot Mic
• System – Monitor
A Call Tone Level
• System – Monitor B Call Tone Level
Channel Specific menu page (independent
configuration settings for channels 1-8):
• Button Mode
• Button Function
• IFB Program Dim
• Headset Routing
• Monitor Routing
• Call Indication
Changes made using STcontroller will be
immediately reflected in the unit’s operation;
no Model 348 reboot is required. Each time
a change is made the eight buttons on the
Model 348’s front panel will flash orange in a
distinctive pattern to indicate that a command
from STcontroller has been received.
General Menu Page
The following configuration selections are
available in the General menu selections tab:
Microphone Input – Headset Mic Power
Choices are Enabled and Not Enabled (box
checked or not).
A headset can be connected by way of a
5-pin female XLR connector, labeled Head-
set A, or a 3.5 mm 4-conductor TRRS jack,
labeled Headset B. Enable the headset mi-
crophone power check box if the connected
headset has an electret microphone which
requires a source of low-voltage DC for opera-
tion. In virtually all cases gaming or computer
headsets that use a 3.5 mm TRRS plug will
require microphone power. Most broadcast