Manual

Issue 5, November 2017 Model 216 User Guide
Page 18 Studio Technologies, Inc.
Sidetone
Switches 5 and 6 configure the way the
sidetone function operates.
There are four choices available:
SW7 Off (Down)/SW8 Off (Down): Audio
input channel 1 is assigned to the left
headphone output channel and audio
input channel 2 is assigned to the right
headphone output channel. The level of
audio inputs 1 and 2 are controlled by
rotary level control C1, located on the
left side of the front panel. Audio in-
put channel 3 is assigned to the left
headphone output channel and audio
input channel 4 is assigned to the right
headphone output channel. The level
of audio inputs 3 and 4 are controlled
by rotary level control C2, located in
the center of the front panel. Sidetone
audio is assigned to both the left and
right headphone output channels and its
level is controlled by rotary level control
C3, located on the right side of the front
panel.
SW7 On (Up)/SW8 Off (Down): Audio
input channel 1 is assigned to the left
headphone output channel and audio
input channel 2 is assigned to the right
headphone output channel. The level of
Figure 7. Headphone operating mode switch
settings
Four modes are available:
Off: In this mode the sidetone function
not active.
Main Button: In this mode the sidetone
function will be active whenever the
audio signal is present on the main
output channel.
Talkback Button: In this mode the side-
tone function will be active whenever
the audio signal is present on any of
the talkback output channels.
Main and Talkback Buttons: In this
mode the sidetone function will be
active whenever the audio signal is
present on the main and/or talkback
output channels.
Headphone Operating Mode
Switches 7 and 8 are used to select how
the four Dante receiver (audio input)
channels, three rotary level controls,
and 2-channel headphone output work
together.
Figure 6. Sidetone switch settings