Manual

Model 205 User Guide Issue 2, October 2018
Studio Technologies, Inc. Page 17
MODEL 205
ANNOUNCER’S CONSOLE
• Push to Talk: If this mode is selected
the main button function will normally be
inactive and the button’s red LED will be
lit. The audio signal associated with the
microphone input will not be routed to
the Dante main output channel and the
microphone output connector will be
muted. Whenever the main button is
pressed the audio signal will become
active on the Dante output channel and
the microphone output connector. In addi-
tion, the button’s green LED will light.
• Latching: If this mode is selected the
main button’s function will alternate
between its active and inactive states
whenever the main button is pressed.
Upon power up the function will be in its
inactive state and the red LED associated
with the button will be lit.
• Push to Talk/Tap to Latch: This mode is
a combination of the Push to Talk and
Latching modes. It’s similar to the way
talk pushbutton switches function on
user stations associated with broadcast
or production intercom systems. If the
main button is pressed and held the main
button’s function will be active. It will stay
active until the main button is released.
If the main button is momentarily “tapped”
the main button’s status will change,
either from inactive-to-active or from ac-
tive-to-inactive. Upon Model 205 power
up the main button will be in its inactive
state and its red LED will be lit.
• Push to Mute/Tap to Latch: This mode is
a combination of the Push to Mute and
Latching modes. Whenever the main
button is momentarily “tapped” the main
button’s status will change, either from
active-to-inactive or inactive-to-active.
When the main button function is active
its green LED will be lit. The audio signal
Four sidetone modes are available:
• Off: In this mode the sidetone function
is not active.
• Main Button: In this mode the sidetone
function will be active whenever the
audio signal associated with the micro-
phone input is present on the Dante
main output channel and the microphone
output connector.
• Talkback Buttons: In this mode the side-
tone function will be active whenever
either or both of the talkback functions
are active and the audio signal is pres-
ent on the talkback 1 and/or talkback 2
Dante output channels.
• Main and Talkback Buttons: In this
mode the sidetone function will be ac-
tive whenever the audio signal associ-
ated with the mic input is present on
the Dante main output channel and the
microphone output connector. The side-
tone function will also be active whenev-
er either or both of the talkback functions
are active.
Button Operation – Main
STcontroller allows the configuration of the
main button to be selected. There are five
mode choices available:
• Push to Mute: If this mode is selected
the main button function will normally
be active and its green LED lit. The
audio signal associated with the mi-
crophone input will be routed to both
the Dante main output channel and the
microphone output connector. Whenever
the main button is pressed the audio
signal will mute on both the Dante main
output channel and the microphone
output connector; the button’s LED will
change from green to red.