Live Link Range Summary
Live-Link Accessories
Live-Link Rack Mounting Enclosure
(Order Code: LL-RME-01)
For use with Live-Link rack-ready versions only. One or two Live-Link units can be
mounted in this enclosure which is then mounted in three spaces (3U) of a standard
equipment rack.
Live-Link Cover
(Order Code: LL-COVER-02)
For use with Live-Link Rack-Ready units. Aluminum cover with no handle, battery bracket, or protective bumpers. For special-
application use only.
Model 45A Interface
(Order Code: M45A)
Use with Live-Link control room units to interface a 2-wire full-duplex party-line (PL) intercom
circuit with the 4-wire intercom connections. Provides full-featured 2-channel interface with
automatic nulling. Powered by PL intercom circuit or external source of 24 Vdc. Self-contained
portable unit. Can be rack-mounted using optional one- or two-unit rack-mount front panel, purchased
separately. Includes 24 V, 0.75 A output/universal input (100-240 V, 50/60 Hz) power supply.
Live-Link/Model 45A Bracket
(Order Code: LL-BRACKET-01)
Allows a Model 45A Interface to be attached to top of Live-Link Portable Version units.
Model 32A Talent Amplifier
(Order Code: M32A)
Self-contained amplifier module designed for use by talent or production personnel. A channel
selector switch, along with level control, allows either IFB channel to drive talent earpiece or
headset. Any combination of up to three Model 32A or Model 33A Talent Amplifiers can be
supported by Live-Link’s IFB output.
Model 33A Talent Amplifier
(Order Code: M33A)
Advanced, self-contained amplifier module designed for use by production personnel.
A channel selector switch, along with two level controls, allows either IFB channel, or a user-
adjusted mix of the two IFB channels, to drive talent earpiece or headset. Any combination
of up to three Model 32A or Model 33A Talent Amplifiers can be supported by Live-Link’s IFB output.
Model 36 Talent Interface
Combination of self-contained headset/earpiece amplifier and microphone routing module.
Up to three Model 36 units can be powered by Live-Link’s IFB output. Select 5-pin XLR, 6-pin
XLR (Swithcraft® pin arrangement), or 7-pin XLR headset connector.
Model 36 with 5-Pin Headset Connector (Order Code: M36-5)
Model 36 with 6-Pin Headset Connector (Order Code: M36-6)
Model 36 with 7-Pin Headset Connector (Order Code: M36-7)
Replacement 12 Vdc, 5 A Power Supply
(Order Code: PS-DC-01)
Universal input, 100-240 V, 50/60 Hz; 12 Vdc, 5 amps (60 watts) output power supply. IEC C14 mains inlet;
4-pin female XLR DC output. One included with each Live-Link Camera End and Live-Link Control Room
unit. This power supply is for spare or replacement only!
Replacement Audio Cable (XLR5M to XLR3F/XLR3M)
(Order Code: 13662)
Used with Live-Link -04X, -05X, -06X, and -07X Control Room Unit’s 4-wire intercom in/out connectors
to “break out” 5-pin XLR connector into one 3-pin female XLR and one 3-pin male XLR. Overall length
approximately 3 feet (0.9 meters). Two included with each Live-Link -04X, -05X, -06X, and -07X system.
Order as spare or replacement only!
Model 36 with
6-Pin Headset Connector Shown
Studio Technologies, Inc. Live-Link Full-Line Summary 50350-0519, Issue 9
Studio Technologies, Inc.
Skokie, Illinois USA www.studio-tech.com
© by Studio Technologies, Inc., May 2019