Live Link Range Summary

Live-Link “05X” Series
Supports Five Paths of 3G Digital Video, Four Mic/Line Inputs, Line/IFB Outputs,
and Party-Line Intercom
These versions interconnect using two strands of single-mode fiber-optic cable (not included) and provide support for the
following:
Digital Video: three 3G/HD/SD-SDI sends (camera to control room) and two 3G/HD/SD-SDI returns (control room to camera)
Mic/Line Audio: four analog mic/line sends (camera to control room) with selectable gain and 48 V phantom power
Line/IFB: two analog line-level audio returns (control room to camera) and one 2-channel IFB output (camera) with 28 V
beltpack power
Intercom: 4-wire (control room) to 2-wire (camera) with auto nulling and 2-channel party-line (PL) interface with 28 V
beltpack power
Data/Remote Control: 10/100 Ethernet, RS-232, RS-422, and GPI/GPO
Portable Version units include universal input (100-240 V, 50/60 Hz)/12 Vdc output power supply, Anton/Bauer battery
mount system (battery not included), handle, and rubber feet. Rack-Ready Version units include universal input (100-240 V,
50/60 Hz)/12 Vdc output power supply and are normally installed in an optional Live-Link Rack Mounting Enclosure
(see Accessories).
opticalCON® DUO Optical Connector (two fibers)
Camera End Unit:
Portable Version (Order Code: LL-3G-CA-051)
Control Room Unit:
Portable Version (Order Code: LL-3G-CR-051)
Rack-Ready Version (Order Code: LL-3G-CR-052)
Typical Configurations:
LL-3G-CA-051 (portable) with LL-3G-CR-051 (portable)
LL-3G-CA-051 (portable) with LL-3G-CR-052 (rack-ready)
ST Optical Connectors, Qty. 2 (two fibers)
Camera End Unit:
Portable Version (Order Code: LL-3G-CA-055)
Control Room Unit:
Portable Version (Order Code: LL-3G-CR-055)
Rack-Ready Version (Order Code: LL-3G-CR-056)
Typical Configurations:
LL-3G-CA-055 (portable) with LL-3G-CR-055 (portable)
LL-3G-CA-055 (portable) with LL-3G-CR-056 (rack-ready)
Studio Technologies, Inc. Live-Link Full-Line Summary Issue 9, May 2019 4