User Guide

Model 780-01/790 User Guide Issue 4, December 2020
Studio Technologies, Inc. Page 27
for Surround
Configuration—Sync Source, Sync Input Termination, and
Audio-Synced-to-Video Sample Rate
Default: Sync source is L/R of currently selected input.
Sync input terminated.
Audio-synced-to-video sample rate 48 kHz.
Use the level control to adjust the audio-synced-
to-video sample rate. Available sample rates are
44.1, 48, 88.2, and 96 kHz.
This LED displays the configuration of the sync input termination. LED L
not lit means sync input is not terminated; LED L lit means terminated with
75 ohms. Use the button to change the configuration.
Press and
hold the Mains
button to display
and select the
sync source,
sync input
termination, and
audio-synced-
to-video-sample
rate.

Video
DARS
Word Clock
L/R of Currently
Selected Input
Use these
buttons to select
the sync source: