User Guide

Model 780-01/790 User Guide Issue 4, December 2020
Studio Technologies, Inc. Page 25
for Surround
Configuration—Model 790 Device Address and Stereo Input
Sample Rate Converter
Default: Device address A1.
Stereo input sample rate converter enabled.
Note: The Model 790’s device address is the only parameter stored in the Model 790. All other parameters are stored
in the Model 780-01.
Press and hold the Mute/Solo
button to display and configure the
Model 790’s device address and
stereo input sample rate converter.
Use the Level control to change this
specific Model 790’s device address.
Address can be either A1, A2, A3, or A4.
See Note below.

This LED displays the configuration of the stereo input
sample rate converter (SRC). LED L not lit means SRC
is disabled; LED L lit means SRC enabled. Use the but-
ton to change the configuration.