User manual

Shapers Module - 2
!
Patch It Up
Five patch points: IN 1, OUT 1, INV 1, IN 2, and OUT 2 connect and direct.
!
All Controls and Patch Points (arranged in order of visual flow)
ATTACK (x2) -!Adjusts the attack stage.
DECAY (x2) -!Adjusts the decay stage.
SUSTAIN (x2) -!Adjust the sustain stage.
RELEASE (x2) -!Adjusts the release stage.
SHORT / LONG RANGE 1 -!Selects the evelope range for ADSR 1.
SHORT / LONG RANGE 2 -!Selects the evelope range for ADSR 2.
IN 1 -!Control voltage input 1.
OUT 1 - Control voltage output 1.
INV 1 - Inverted control voltage output 1.
IN 2 -!Control voltage input 2.
OUT 2 -!Control voltage output 2.
!
36