User manual

SEM Filter Module - 3
OUTPUT – Audio output.
!
*
From 7:00 (0) to 9:00 our “Negative Resonance Saturation” adds beefiness, boosting the waveform amplitude and taming
waveform transients (most pronounced in this 3003 filter): set to 9:00 to achieve the cleanest tone possible.
!
BYSIB (Before You Send It Back)
This filter (and the SE88) can be ‘input driven’ to the cutout/cutoff/blackout point, for angry, aggressive unpredictability, and
staggered, shell-shocked recovery. We wanted it that way; it’s perfectly harmless OpAmp smashing, for smashing good fun.
Think traumatic movie scene after which an actor’s hearing momentarily disappears (extreme wooziness overtakes the balance
of his senses—and camera work), high-pitched sounds follow, and then blessed normalcy of awareness and sensory
perception gradually, grudgingly return. That. No reboot necessary: just sweep the frequency forward and back, and pull back
the input level, unless of course you want "that" to keep happening. Taunting the edge is entertaining too.!
22