User manual

SEM Filter Module - 2
!
Patch It Up
Seven patch points: 1 V/O, FREQ CV 1, FREQ CV 2, RESO CV, INPUT, BP, LP-HP, and OUTPUT jack you in.
!
All Controls and Patch Points (arranged in order of visual flow)
FREQUENCY –!Adjusts the frequency, or cut-off of the filter.
RESONANCE –!Adjusts the resonance of the filter. *
FULL HALF TRACK –!Switch between full and half keyboard/voltage tracking.
FREQ CV 1 –!Frequency control voltage 1 input attenuverter.
RESO CV – Resonance control voltage input attenuverter.
FREQ CV 2 – Frequency control voltage 2 input attenuverter.
INPUT – Adjusts the audio input.
OUTPUT – Adjusts the audio output.
1 V/O – One volt per octave control voltage input.
FREQ CV 1 – Frequency control voltage 1 input.
BP OUT – Band Pass Output. No cable patched, BP passes through the mains.
RESO CV – Resonance control voltage input—use for shimmers or howling wolf tones.
LP HP – Low Pass / High Pass attenuverter.
INPUT – Audio input. !
21