- Studer Sinewave Inverter, Battery charger User and Installer Manual COMPACT C1312COMPACT C1312COMPACT C1312COMPACT C1312 COMPACT C2324COMPACT C2324COMPACT C2324COMPACT C2324 COMPACT C3548COMPACT C3548COMPACT C3548COMPACT C3548

STUDER INNOTEC COMPACT
COMPACTCOMPACT
COMPACT
User manual COMPACT V2.0 E 22
5.5.1 Diagram of the different mode
9
Show an off LED
Show a blinking LED
Show a lighted LED
CHARGER
INVERTER
AC OUTAC IN
1
2
7
8
9
All the functions are enabled. This is the
factory setting.
CHARGER
INVERTER
AC OUTAC IN
1
2
7
8
9
The inverter is disabled. Only the transfer
switch and the charger will work normally.
CHARGER
INVERTER
AC OUTAC IN
1
2
7
8
9
Charger and transfer switch are disabled. the
inverter will work continuously even if there is
a correct AC voltage at the input
CHARGER
INVERTER
AC OUTAC IN
1
2
7
8
9
Inverter and charger are both disabled.
Only the transfer switch function is enabled in
input voltage and frequency is OK.
6 Maintenance
Apart from the periodic controls mentioned for the connections, the COMPACT does not need any
maintenance. Keep the appliance clean and from time to time wipe it clean with a damp cloth.
7 EC Compliance
We hereby state that the products described in this user manual meets the following standards:
EN50081 I/II, EN55014 – EN61000-2-3, IEC801 II/III/IV, LVD 73/23/EEC, EMC Dir. 89/336
CH-1950 Sion, 31
st
of March 2000 STUDER INNOTEC (R. Studer)