SOUND STATION PORTABLE STEREO BLUETOOTH / CD / AM-FM RADIO / CASSETTE RECORDER BOOMBOX MODEL: SB2140 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
WARNING TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom enclosure of the apparatus. The Rating plate is located at the bottom enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions.
15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19.
COMPLIANCE WITH FCC & IC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly. Do not put anything in the safety slot.
Protect your SB2140 from higher temperature conditions and activities that might cause damage to the unit or affect performance • Do not leave this unit in direct sunlight. • Do not leave this unit in a car on a hot day. • Do not use certain features in hot conditions or direct sunlight for an extended period of time. PROTECT YOUR FURNITURE This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls.
LOCATION OF CONTROLS 1 MASTER VOLUME 20 DIAL SCALE 2 TREBLE KNOB 21 BLUETOOTH OUT 3 BASS KNOB 22 CD / USB / PAIR / 4 BALANCE KNOB 23 BUTTON 5 FM ANTENNA 24 6 BUTTON HEADPHONE JACK CHARGE INDICATOR 25 TREBLE SPEAKER 7 BT 26 VU METER 8 FM ST.
POWER SOURCE This unit can be operated using either AC power or the built-in Li-Polymer rechargeable battery AC POWER OPERATION Plug the included AC adapter into the standard AC power outlet to power the unit. Connect small end to DC INPUT jack of main unit. After adapter connection, press the POWER button to turn on / off the unit. BATTERY (build-in) OPERATION Unplug the DC INPUT jack of main unit. The unit will enter Battery Operating mode automatically. LOW BATTERY INDICATION 1.
NOTE: These speakers are not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the speakers further away from the TV or monitor if unnatural color shifts or image distortion occurs. RADIO OPERATION 1. Slide the FUNCTION SWITCH to RADIO position. 2. Select the desired FM mode by switching the FM/FM ST. BAND SELECTOR on unit tip panel. 3. Tune to your desired station with the TUNING knob.
9. To locate a particular section within a track, press and hold the / section is found. button 10. To stop playing, press the STOP 11. Slide the FUNCTION switch to POWER OFF position to turn off the unit button until the +10 button control Press the +10 button once to advance the music search by increment of 10 tracks. REPEAT MODE Repeat 1 To repeat the current track, press the REPEAT BUTTON once, the REPEAT INDICATOR will flash in LED display.
2. Insert your USB flash-drive into the USB port, unit starts to read the USB flash-drive. Notes: 1.) USB supports flash drive capacity up to 32 GB maximum. 2.) Due to various USB flash drives in the market, please always fold down the carrying handle before insert USB flash drive into the USB port. 3.) When carrying this unit, be sure your USB flash drive is not taller than the space under the carrying handle to avoid damaging. 3.
blink on the LED DISPLAY to prompt for input. 4. Press the PROGRAM button again to store selection. The Program Channel Number will change to “P02”. 5. You may repeat steps 2 - 3 to program as many as 20 tracks. When the memory full, “FUL” will show on the LED DISPLAY. button to start the programmed play. 6. Press the PLAY/PAUSE button once to stop playback. 7. Press STOP 8. Press the button to resume programmed play. 9. To cancel programmed play, press the STOP button twice.
• If your Bluetooth enabled device does not support A2DP, it will not play the music through the SB2140 system even after it is paired and connected successfully. • If you are pairing and connecting your personal computer to the SB2140 using Bluetooth, you may need to set the SB2140 as your computer’s default sound device.
USE EARPHONES (NOT INCLUDED) Inserting the plug of your stereo headphones (not included) into the headphone jack located on the top panel will enable you to listen in private. When using headphones, the speakers will be disconnected. Read this Important Information before Using Your Headphones 1.) Avoid extended play at very high volume as it may impair your hearing. 2.) If you experience ringing in your ears, reduce the volume or shut off the unit. 3.
Recording from the built-in Radio 1. Slide the FUNCTION switch to "Radio" position. The POWER indicator will light. 2. Select the BAND switch to the desired band position. 3. Adjust the ANTENNA appropriately to obtain best reception 4. Insert the cassette into the Cassette Compartment. 5. Press the PAUSE button. 6. Press the RECORD button. 7. Release the PAUSE button to begin recording. 8. Adjust the VOLOUME, if necessary. 9. To stop recording, press STOP/EJECT button.
6. Press the RECORD button. button to start to play. 7. Press the PLAY/PAUSE 8. Release the PAUSE button to begin recording. 9. Adjust the VOLUME, if necessary. 10. To stop recording, press STOP/EJECT button. When the tape operate to the end recording will be stop automatically. Recording from the Bluetooth 1. Slide the FUNCTION switch to "BT “position. The POWER indicator will light. 2. Follow the Bluetooth operation section to pair the unit and external BT device 3. Play the song through the SB2140 unit.
Cleaning the Tape Heads and Tape Path For continued high performance from your cassette deck, periodically clean the head, pinch roller, and capstan. We recommend cleaning after every 20-30 hours of operation. To clean the tape deck, press the STOP/EJECT key to open the deck door. Remove any tape in the deck. Make sure that the power to the unit is OFF. Moisten a cotton swab with isopropyl alcohol or a special head cleaning fluid.
Poor cassette sound quality Recording does not work CD player will not play CD skips while playing Intermittent sound from CD Player BT No Sound Dust and dirt on the heads, Clean the heads etc… capstan or pinch roller Cassette tab(s) maybe broken out Apply a piece of adhesive tape over the missing tab space Unit not in CD function mode. Slide Function switch to CD. CD is installed incorrectly. Insert CD with label side up.
