User Manual

- 3 -
PRODUCT DESCRIPTION
Motor:
Induction type, totally enclosed fan ventilated cooling, continuously rated, class ‘F’
insulation. Motors comply with BS 5000 or IEC 34-1. Single phase versions incorporate
a permanent capacitor and integral auto resetting thermal overload protection. Enclosure
ratings are given in the technical specification section.
The standard range of motors are suitable for a supply of 230V, 1 phase, 50Hz.
Optional motors are available on certain models to suit various voltages and frequencies
(see technical specification for details).
Pump:
Close coupled, end suction configuration and of centrifugal design. The number of
pump stages are given in the technical specification section. Standard pump materials of
construction of major wetted parts are as follows: -
Other seal material options are available on certain models.
LIMITS OF APPLICATION
Model Body Impeller Shaft Mechanical Seal
Kennet Range Brass
Acetal or
Brass
Stainless Steel
Nitrile/Carbon/Silicon
Carbide/Stainless Steel
Thame Range
Noryl
Stainless Steel
Polycarbonate Stainless Steel
Nitrile/Carbon/Silicon
Carbide/Stainless Steel
Loddon
Noryl
Stainless Steel
Polycarbonate Stainless Steel
Nitrile/Carbon/Silicon
Carbide/Stainless Steel
X201 Noryl Glass filled Nylon Brass (Sleeved)
Nitrile/Carbon
Ceramic/Stainless Stee
* With footvalve fitted.
**Note: Max working pressure is the maximum pressure that can be applied to the
pump internal casing under any installation conditions.
Model Supply Impeller
Material
Max.
Liquid
Temp.
o
C
Min.
Liquid
Temp.
o
C
Max.
Ambient
Air Temp
o
C
Max.
Suction
Lift (m)
Max. Head
(Pump
Closed
Valve) (m)
Max. Viscosity
**Max.
Working
Pressure
kPa (bar)
Max.
Inlet
Head
(m)
Max.
No.
Starts/h
(Redwood
No. 1 Scale)
Centistokes
K7-2 230/1/50 Plastic 80 4 40 4.6* 9.2 50 9.5 600 (6) 51 60
K9-2 230/1/50 Plastic 80 4 40 4.6* 8.9 50 9.5 600 (6) 51 60
K9-2 230/1/50 Brass 80 4 40 4.6* 9.2 50 9.5 600 (6) 51 60
K9-2 400/3/50 Plastic 80 4 40 4.6* 9 50 9.5 600 (6) 51 60
K12-2 230/1/50 Plastic 80 4 40 4.6* 13.9 50 9.5 600 (6) 51 60
K12-2 230/1/50 Brass 80 4 40 4.6* 14.7 50 9.5 600 (6) 51 60
K12-2 400/3/50 Plastic 80 4 40 4.6* 14 50 9.5 600 (6) 45 60
T6-2 230/1/50 Plastic 65 4 40 4.6* 30 50 9.5 400 (4) 10 60
T12-2 230/1/50 Plastic 65 4 40 4.6* 32 50 9.5 400 (4) 7 60
L5-4S 230/1/50 Plastic 65 4 40 4.6* 47.5 50 9.5 700 (7) 27 60
L7-4S 230/1/50 Plastic 65 4 40 4.6* 49.5 50 9.5 700 (7) 23 60
X201 230/1/50 Plastic 50 4 40 6 19 50 9.5 300 (3) 11 60