User Manual

- 13 -
Cont ...
Wiring Diagrams
The supply cord and internal wiring within the terminal box are routed
and secured to ensure compliance with the electrical standard EN 60335-1.
It is essential that any disturbance of this internal wiring is avoided and the
factory routing and securing of all internal wiring is always maintained.
NOISE
The equivalent continuous A-weighted sound pressure level from the pumpset does not
exceed 70 dB(A) at a distance of one metre.
COMMISSIONING
WARNINGS:
 The motor casing can become very hot under normal operating
conditions, care should be taken to ensure it cannot be touched
during operation.
 Do not run pump without guards and terminal box lid correctly fitted.
 The pump chamber must be full of liquid at all times. Seal damage
will result if the pump runs dry.
START WIN DI N G
E
CAPACITOR
GREEN/YELLOW
BLACK BLACK BROWN WHITE BLUE
BLUE
BROWN
230V, 1 phase, 50Hz s upply
THAME, LODDON & X201 RANGE
KENNE T K7-2, K9-2 & K12-2 RANGE
230V, 1 phase, 50Hz s upply
400V,3 phase, 50Hz supply
KENNET K9-2 & K12-2
ANY TWO SUPP LY LEADS
TO REVERSE ROTATION INTERCHANGE
L3
L1
L2
W
V
U
RED
YELLOW
MOTOR
BLUE
BLACK
WHITE
BROWN
E
GREEN/YELLOW
230 VAC/1PH/50Hz
SUPPLY
L N E
BROWN
BLUE
GREEN/YELLOW
BROWN
LINK WIRE (BLUE)
BLACK
CAPAC ITOR
MAIN WINDING
BLUE
THERMOTRIP
Fig. 16
Fig. 17
Fig. 18