User Manual
Table Of Contents
- Strymon Flint User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 8
Flint - tremolo & reverb
Live Edit Functions
Reverb Boost/Cut
Allows you to adjust a +/- 3dB volume boost or cut when the Reverb is
On�
1 Press and hold the REVERB ON footswitch to enter Live Edit mode�
Once both LEDs flash, release the footswitch�
REVERB
BOOST/CUT
2 Turn the MIX (REVERB BOOST/CUT) knob to adjust the amount of
boost or cut level of the Reverb� Both ON LEDs indicate your knob
changes smoothly from -3dB cut (GREEN) at minimum to +3dB
boost (AMBER) at maximum� Unity gain is at the 12 o’clock position
(default)�
3 Press the REVERB ON footswitch to exit and store your Reverb Boost/
Cut setting�
NOTE: The Reverb Boost/Cut setting is saved per Favorite setting or MIDI
preset�