User Manual
Table Of Contents
- Strymon Flint User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 7
Flint - tremolo & reverb
Live Edit Functions
Use the following steps to enter Live Edit mode to access several knobs’
secondary functions� Any of the following secondary functions can be
edited while in Live Edit mode�
Tremolo Boost/Cut
Allows you to adjust a +/- 3dB volume boost or cut when the Tremolo is
On�
1 Press and hold the REVERB ON footswitch to enter Live Edit mode�
Once both LEDs flash, release the footswitch�
TREMOLO
BOOST/CUT
2 Turn the INTENSITY (TREMOLO BOOST/CUT) knob to adjust the
amount of volume boost or cut for the Tremolo� Both ON LEDs indicate
your knob changes smoothly from -3dB cut (GREEN) at minimum to
+3dB boost (AMBER) at maximum� Unity gain is at the 12 o’clock
position (default)�
3 Press the REVERB ON footswitch to exit and store your Tremolo
Boost/Cut setting�
NOTE: The Tremolo Boost/Cut setting is saved per Favorite setting or MIDI
preset�