User Manual

pg 43
Flint - tremolo & reverb
Live Edit Controls Quick Reference
Flint provides a way to adjust several secondary functions that are avail-
able on several knobs� (Also, see “Live Edit Functions” on page 7 � )
Live Edit Functions are saved per preset�
1 Press and hold the REVERB ON footswitch until both LEDS blink to
enter Live Edit mode�
2 Release the footswitch and use the knobs as described below�
3 Press REVERB ON footswitch to store setting and exit Live Edit mode�
TREMOLO BOOST/CUT
See page 7 for an
illustrated description�
Turn the INTENSITY knob—both LEDs change
color from GREEN (-3dB cut) to AMBER (+3dB
boost) as the control is adjusted� As the default, no
Boost/Cut is applied
REVERB BOOST/CUT
See page 8 for an
illustrated description�
Turn the MIX knob—both LEDs change color from
GREEN (-3dB cut) to AMBER (+3dB boost) as the
control is adjusted� As the default, no Boost/Cut is
applied
TAP DIVISION
See page 9 for an
illustrated description�
Turn the SPEED knob—both LEDs change color as
the control is adjusted
• 1/16 = RED
• Triplet = AMBER
• 1/8 = GREEN
• 1/4 = BLUE (default)
EFFECT ORDER
See page 10 for an
illustrated description�
Turn the DECAY knob—the TREMOLO ON LED
changes color from
• Reverb > Tremolo = GREEN (default)
• Tremolo > Reverb = RED
PREDELAY
See page 11 for an
illustrated description�
Turn the COLOR knob—the REVERB ON LED
changes color from GREEN (minimum, default) to
AMBER (maximum) as the control is adjusted
MIDI CLOCK SYNC
See page 12 for an
illustrated description�
Set the REVERB type switch to the ‘80s (down) or
‘60s (up) position—status is momentarily shown on
both LEDs
• ‘80s position: OFF, RED (default)
• ‘60s position: ON, BLUE
MIDI EXPRESSION
See page 13 for an
illustrated description�
Set the TREMOLO type switch to the ‘65 photo
(down) or ‘61 harm (up) position—status is mo-
mentarily shown on both LEDs
• ‘65 photo position: OFF, RED
• ‘61 harm position: ON, BLUE (default)