User Manual

pg 41
Flint - tremolo & reverb
Power Up Modes Quick Reference (cont.)
Global parameters and functions can be accessed via a power up proce-
dure� All power up functions persist through power cycles�
MIDI & Jack Options
1 Press and hold the TREMOLO ON footswitch while powering up Flint�
Once both LEDs flash, release the footswitch�
2 Adjust the desired functions with the knobs and buttons noted below�
3 Press either footswitch to store your changes and exit power up mode�
EXP/MIDI JACK
MODE
See page 17
for an illustrated
description�
Turn MIX knob - status shown on REVERB ON LED
• Expression: GREEN (default)
• Favorite: AMBER
• Tap: RED
• MIDI: BLUE
MIDI CHANNEL
See page 27
for an illustrated
description�
Turn INTENSITY knob - status shown on TREMOLO ON
LED
• 1: GREEN (default)
• 2: AMBER
• 3: RED
• 4-16: BLUE (channel set by next MIDI Program
Change message)
MIDI OUT MODE
See page 29
for an illustrated
description�
Turn DECAY knob - status shown momentarily on both
LEDs
• OFF: RED (default)
• THRU: BLUE
• ON CC, PC, OTHER: WHITE
• ON CC, OTHER: GREEN
• ON PC, OTHER: PURPLE
• ON OTHER: AMBER