User Manual
Table Of Contents
- Strymon Flint User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 14
Flint - tremolo & reverb
Power Up Modes
Input Level
Select the input level that is routed to the effect processing�
1 Press and hold the REVERB ON footswitch while powering up Flint�
Once both LEDs flash, release the footswitch�
INPUT LEVEL
2 Turn the INTENSITY (INPUT LEVEL) knob to select the Input Level
mode� The TREMOLO ON LED will change color to indicate the cur-
rent status as you turn the knob�
• Instrument: GREEN (default) - Input headroom is set for an in-
strument level source, such as a guitar or a bass�
• Line: RED - Input level is set for a line level source, such as a
keyboard or synthesizer� 10dB of headroom is added�
3 Press either footswitch to store the Input Level setting and begin
using Flint�
NOTE: The Input Level setting persists across power cycles and is not saved
per preset�