User Manual
Table Of Contents
- Strymon DIG User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 7
DIG - dual digital delay
Live Edit Functions
Use the following steps to enter Live Edit mode and access the second-
ary functions of the controls� Any of the following secondary functions
can be edited while in Live Edit mode�
Dry Level
By default, the Dry Level is set to “Track Mix,” where the Dry Level is
controlled via the MIX and MIX 2 knobs� Optionally, you can adjust the dry
signal level manually�
1 Press and hold the ON footswitch to enter Live Edit mode� Once both
LEDs flash, release the footswitch�
2 Turn the MIX (DRY LEVEL) knob to set the level of the dry signal� Both
the TAP and ON LEDs light to indicate your selection:
• Manually adjust the Dry Level smoothly from no dry signal at
minimum (GREEN, useful when DIG is connected in a parallel
effects loop) to maximum dry signal, where the dry matches the
dry input signal level (AMBER)�