User Manual
Table Of Contents
- Strymon DIG User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 31
DIG - dual digital delay
STEP 2 – SET MIDI CHANNEL (CONT�)
4 Press either footswitch to exit and store your MIDI Channel setting
and begin using DIG�
NOTE: A simple way to check that communication is working is to send CC
#102 with a value of 127 when the ON footswitch is off� This will enable the
ON footswitch if MIDI is properly connected and configured�
NOTE: If you are only sending data to DIG using the Strymon MIDI EXP Cable,
the MIDI OUT mode must be set to OFF� (See page 32 for details on con-
figuring the MIDI OUT mode�)
NOTE: MIDI Channel assignment is not saved per Favorite setting or MIDI
preset�