User Manual
Table Of Contents
- Strymon DIG User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 18
DIG - dual digital delay
Power Up Modes
Bypass Mode
Setting DIG to Buffered Bypass mode preserves the high frequency
response of your guitar signal through your pedal chain and long cable
runs�
1 Press and hold the ON footswitch while powering up DIG� Once both
LEDs flash, release the footswitch�
2 Turn the MIX (BYPASS MODE) knob to choose between True Bypass
or Buffered Bypass modes� The ON LED will change color to indicate
the current status as you turn the knob�
• True Bypass: GREEN (default)�
• Buffered Bypass: RED
3 Press either footswitch to store the Bypass Mode and begin using
DIG�
NOTE: The Bypass Mode setting persists across power cycles and is not
saved per preset�