User Manual

pg 45
Deco - tape saturation & doubletracker
Live Edit Controls Quick Reference
Deco provides a way to adjust several secondary functions that are avail-
able on the controls (see “Live Edit Functions” on page 11 )� Live
Edit Functions are saved per preset�
1 Press and hold the TAPE SATURATION ON footswitch until both LEDs
blink to enter Live Edit mode�
2 Release the footswitch and use the knobs as described below�
3 Press TAPE SATURATION ON footswitch to store your setting and exit
Live Edit mode�
AUTOFLANGE TIME
See page 11 for an
illustrated description�
Turn the LAG TIME knob—both LEDs change color
from GREEN (fast) to AMBER (slow) as the control
is adjusted� Default is 12 o’clock
LOW TRIM
See page 12 for an
illustrated description�
Turn the TONE knob—the TAPE SATURATION ON
LED changes color from GREEN (full bandwidth,
default) to AMBER (more high passed) as the
control is adjusted� Default is 0%�
DOUBLETRACKER
BOOST/CUT
See page 13 for an
illustrated description�
Turn the BLEND knob—both LEDs change color
from GREEN (-3dB to unity) to AMBER (unity to
+3dB) as the control is adjusted
(unity is at 12 o’clock, the default)
WIDE STEREO MODE
See page 14 for an
illustrated description�
Turn the WOBBLE knob—the DOUBLETRACKER
ON LED changes color from GREEN (off, default) to
RED (on) as the control is adjusted
MIDI CLOCK SYNC
See page 15 for an
illustrated description�
Set the TYPE switch to the bounce (down)or sum
(up) position—status is momentarily shown on
both LEDs
• bounce position: OFF, RED (default)
• sum position: ON, BLUE
MIDI EXPRESSION
See page 16 for an
illustrated description�
Set the MODE switch to the cassette (down) or
classic (up) position—status is momentarily shown
on both LEDs
• cassette position: OFF, RED
• classic position: ON, BLUE (default)