User Manual
Table Of Contents
- Strymon Deco User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 30
Deco - tape saturation & doubletracker
STEP 2 SET MIDI CHANNEL (CONT.)
4 Press either footswitch to exit and store your MIDI Channel setting
and begin using Deco�
NOTE: A simple way to check that communication is working is to send CC
#10 with a value of 127 when the TAPE SATURATION footswitch is off� This
will turn the TAPE SATURATION footswitch LED on if MIDI is properly con-
nected and configured�
NOTE: If you are only sending data to Deco using the Strymon MIDI EXP
Cable, the MIDI OUT mode must be set to OFF� (See page 31 for details on
configuring the MIDI OUT Mode�)
NOTE: MIDI Channel assignment is not saved per Favorite setting or MIDI
preset�