User Manual
Table Of Contents
- Strymon Deco User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 22
Deco - tape saturation & doubletracker
External Control
Favorite Switch Setup and Compare Mode
Connect a MiniSwitch or other external latching footswitch with a TRS
cable to store and recall your favorite setting�
OR
1 Configure the EXP/MIDI jack for Favorite mode� (See page 19 for
more info�)
2 Connect an external switch with a TRS cable to the EXP/MIDI jack�
3 Dial in your desired sound�
4 To save your sound as the new Favorite setting, press and hold both
footswitches until they blink GREEN� Then, press and hold the TAPE
SATURATION ON footswitch until the TAPE SATURATION ON LED
momentarily flashes BLUE to save the Favorite setting�
Step on the external footswitch to toggle between your Favorite set-
ting and the current setting on Deco�