User Manual

MAGNETO - Four Head dTape Echo & Looper
®
pg 8
PLAYBACK LEVEL & FEEDBACK ON/OFF
Knobs 1-4: Controls the individual level of the
delay repeats for each of the four tape heads.
WET: Sets the overall delay signal
level sent to the output after the
Playback Level knobs.
REPEATS: Controls the feedback
level of the delay repeats for the tape
heads that have their FEEDBACK
toggle set to ON.
Enables or disables FEEDBACK of the corresponding
tape head signal to the record head. Buttons are
GREEN during this operation.
Example 1: If FEEDBACK button 1 is OFF, this will
disable the feedback of Playback Head 1 back into the
delay line.
Example 2: If FEEDBACK button 1 is ON, the delay
signal at Playback Head 1 will feed back into the
delay line.
PLAYBACK LEVEL FEEDBACK ON/OFF
NOTE: A head can be fed back to the input even
if its PLAYBACK LEVEL knob is set to zero.