User Manual

MAGNETO - Four Head dTape Echo & Looper
®
pg 5
MODES & TAP Button (cont.)
SAMPLE mode: (RED LED) Phrase sampler records
an audio phrase between two taps of the TAP button.
Transport RESTART ( ) triggers phrase playback.
Press the TAP button once to start sample recording,
again to stop recording, and a third time to clear the
sample memory.
Trigger sample playback with the RESTART transport
button or RESTART CV input.
TIP: Connect CLK OUT 4 to RESTART CV for
continuous re-triggering of the recorded sample.
MODE TAP
Tap to start sample record
Tap again to stop recording
Press RESTART ( ) in the Transport to
playback the sample once
Tap a third time to clear the sample memory
NOTE: In LOOP and SAMPLE mode, the
maximum time between SPLICE IN and SPLICE
OUT (or SAMPLE START and SAMPLE END) is
determined by the tape Speed.
1 min
2 min
30s
15s