User Manual

MAGNETO - Four Head dTape Echo & Looper
®
pg 4
MODES & TAP Button
LOOP mode: (AMBER LED) Sound-on-Sound looper.
Tape head 4 is the looper playback head while tape
heads 1-3 provide delay repeats for the incoming
signal.
The FEEDBACK ON/OFF button for Playback Head 4
must be ON to enable S.O.S. loop playback.
Press the TAP button once to Splice In. Press TAP a
second time to Splice Out and begin loop playback.
Pressing TAP a third time will clear the recorded
loop.
The REPEATS knob controls regeneration strength.
Set lower REPEATS level for loops that evolve over
time.
ECHO mode: (GREEN LED) Four head tape delay,
with four playback heads and one record head.
Tap a delay time with two successive presses.
The TAP button changes the head spacing to achieve
the desired delay time at the current machine speed.
The MODES button toggles between ECHO, LOOP
and SAMPLE.
Tap to splice in
Tap again to splice out and begin loop
playback.
Tap a third time to clear loop
+
=
Delay Time at Head 4
MODE TAP
NOTE: The delay TAP range is 50ms-15s,
regardless of tape speed setting.