User Manual

MAGNETO - Four Head dTape Echo & Looper
®
pg 17
Control Voltage Inputs
CV INPUTS (05V RISING EDGE TRIGGER)
CLK IN: Sets the delay time in quarter notes. (0 – 5v
rising edge trigger) Clock period range – 50ms to
15s.
REC GATE: Toggles the record head ON and OFF,
REC LVL LED lit BLUE when input signal to the delay
line is muted.
SHIFT: Toggles the SHIFT effect for the Playback
heads on and off.
INFINITE ( ): Toggles INFINITE transport control on
and off.
FORWARD/REVERSE ( ): Toggles the FORWARD/
REVERSE transport function.
RESTART ( ): Engages the RESTART transport
function.
PAUSE ( ): Toggles the PAUSE transport function.
TAP: Controls the function of the physical TAP button.
Sets delay time in ECHO mode. Sets splice in/out/
clear in LOOP mode. Sets sample record start/stop/
clear in SAMPLE mode.
CONTINUOUS CV INPUTS (5V TO +5V)
SPEED: Controls the tape speed. (-3V to +3V,
calibrated for 1V/octave).
WET: Modifies the WET level.
REPEATS: Modifies the REPEATS level.
SPRING: Modifies the SPRING reverb level.
TIP: The knob corresponding to the continuous
CV inputs acts as an offset that is mixed with
the CV input.
TIP: Connecting the GATE signal from a source
to the RESTART CV will create a zero-latency
suboctave from HEAD 3 with Magneto in SHIFT
mode.
TIP: When using the SHIFT head mode with a
sequenced or clocked system, sending a
synchronous clock (or divided clock) to the
RESTART CV will align the Shift pointers and
create rhythmic pitched delays that are in
synch with the input.