User Manual

MAGNETO - Four Head dTape Echo & Looper
®
pg 13
Custom Panning
The panning for all four tape heads can be set manually when PAN switch
is set to CENTER. To set the panning for each of the playback heads, turn
the PLAYBACK LEVEL knob while pressing and holding down that head’s
corresponding FEEDBACK button while in FEEDBACK (GREEN) mode. Turn
left for left panning, right for right panning, or set to 12 o’clock noon for
center panning.
To adjust the panning for Playback Head 1:
1. Set PAN to CENTER
2. Press and hold GREEN FEEDBACK ON/OFF
button under PLAYBACK LEVEL 1 knob.
3. While holding down FEEDBACK ON/OFF,
turn PLAYBACK LEVEL 1 knob to adjust
panning for PLAYBACK HEAD 1.
L R
NOTE: All four tape heads are centered.
A psycho-acoustic image is produced when
monitoring in stereo.