User Manual

TimeLine - User Manual
®
pg 23
NOTE: If any of the above options do not appear in the GLOBLS menu, you may need to update
the firmware to the latest version. Visit the link below for instructions:
www.strymon.net/update
Globals Menu (continued)
OFF
OFF
MIDI Send State: When a preset is loaded, the MIDI state (CC values) of active preset MIDI
parameters are sent to the MIDI output.
MIDI Clock: When set to ON, TimeLine will respond to external MIDI clock from the MIDI input.
ON
ON
ON
MIDI Clock Reset: Allows the option to re-sync delay time back to an external MIDI clock source
tempo after tapping in a new tempo or sweeping the time knob.
OFF
ON
MIDI Clock Sweep: Allows the option to keep or remove delay pitch artifacts when changing TAP
tempo from an external MIDI clock source.
OFF
EXIT
Preset Dump: Allows presets to be sent via MIDI to another TimeLine or to a MIDI recorder
device. Presets can be dumped individually or all at one time. Select ALL to
dump all presets, or scroll to select an individual preset to send. Initiate send by
pressing VALUE encoder.
ALL
PR 0A - 99C