User Manual

TimeLine - User Manual
®
pg 2
Front Panel Controls
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
push (bank / time)
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
VALUE: Provides fi ne
adjustment of delay time.
Push to access the parameter
menu for the current delay
machine. Hold to access the
global menu.
TIME: Provides coarse
adjustment of delay time.
REPEATS: Sets the delay feedback
level (number of repeats.)
MIX: Adjusts the mix of
analog dry signal to wet
delay signal. The Mix
occurs in analog. Set
around 3 o’clock for a
50/50 mix.
FILTER: Controls the shape of the repeats fi lter.
dTape: controls tape age
dBucket: controls the special dBucket fi lter. See
dBucket section for full details.
Filter: controls center frequency of LFO fi lter.
GRIT:
Progressively
adds distortion
and artifacts
dTape: controls
tape bias
dBucket:
controls bucket
loss
SPEED:
Controls
the speed
of the delay
modulation LFO
dTape: controls
tape crinkle
DEPTH:
Controls the
intensity of
the delay
modulation.
dTape: controls
wow & fl utter
TYPE: Selects the
currently active delay
machine. Push to toggle
the display between
showing time and the
current bank. Hold to
save the current preset.
TIP: If the parameter or
global menu is currently
displayed, push to exit
and show bank or time.
FOOTSWITCH A: Press to
engage or bypass preset A
of the current bank. Hold
to activate infi nite repeats.
Looper Active: Activates
record if there is
no loop recorded
or clears the loop
and starts recording
if the looper is
stopped. Overdubs if
loop is playing.
A & B LEDS: Green if
active. Amber if the
preset has been edited.
Off if bypassed.
TAP LED: Flashes to
indicate delay time in
quarter notes. Flashes
alternating red/green
while looper is active.
Flashes amber to
indicate that a tap
division is active.
TIP: To fi nd the knob
positions of a saved
preset, turn each knob
until the LED returns
to GREEN after glowing
Amber.
FOOTSWITCH B: Press to engage or bypass
preset B of the current bank. Hold to activate
infi nite repeats.
Looper Active: Starts playing loop. Restarts
loop from beginning if pressed while playing.
TAP: Tap to set the delay
time.
Looper Active: Stops loop.
Hold to enter and exit
looper.
BANK SELECT: Press A & B to select a lower bank. Press B & TAP to select
a higher bank. While the selected bank is pending it is displayed as “B.A.N.K.”
After the desired bank is selected, press A or B to activate a preset from that
bank.