User Manual

TimeLine - User Manual
®
pg 18
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
BANK / TIME
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
Delay Machines: dTape
An intricate re-creation of a sliding head tape delay system.
PARAMETERS:
+ | | -
Low End Contour: Allows for shaping the low-end from full low-end to extreme progressive high-
passing. With high repeats, this control is a major factor in the overall tape
machine sound.
FAST
Tape Speed: Choose Fast speed for a higher fi delity experience
or Normal for standard tape machine operation. The
Wow/Flutter (Mod Depth knob) and Tape Crinkle (Mod
Speed knob) track the tape speed for a huge range of
tape machine experiences.
NORMAL
TAPE AGE: In dTape,
the fi lter knob takes on
the function of TAPE
AGE. This controls the
bandwidth of the tape
just as it would change
over time in a traditional
tape delay machine.
As regular tapes wear
out, their bandwidth
becomes limited. The
TAPE AGE control
recreates this. Set to
minimum for a fresh,
full bandwidth tape.
As the knob is turns
clockwise, the tape
will get progressively
darker.
KNOB FUNCTIONS: In dTape, four of the knobs assume different controls than the other delay machines.
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
push (bank / time)
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
TAPE BIAS: In dTape,
the GRIT knob takes on
the function of TAPE
BIAS. This control adjusts
tape machine bias,
from under-biased to
over-biased. Bias sets
the dynamic range and
headroom of the delay
signal. Higher bias levels
result in reduced echo
volume and limited
headroom. Lower bias
settings result in the
cleanest echoes with the
most headroom. For an
optimally biased tape
machine set to 9:00. For
an under biased tape
machine with extra high
frequency response set to
minimum.
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
push (bank / time)
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
TAPE CRINKLE: In dTape,
the SPEED knob takes
on the function of TAPE
CRINKLE. This control
adjusts the amount
and severity of tape
irregularities, including
friction, creases, splices
and contaminants. Tape
Crinkle characteristics
track accordingly to tape
speed. Set to minimum
for a fresh, clean tape. Set
to maximum for a tape
that has been mangled
and chewed for years.
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
push (bank / time)
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
WOW & FLUTTER: In
dTape, the DEPTH knob
takes on the function of
WOW & FLUTTER. This
control varies the amount
of mechanically related
tape speed fl uctuations.
This also results in
natural tape machine style
modulation. Turn the knob
fully counter clockwise
for a perfectly tuned,
cleaned and serviced tape
machine. Turn the knob
fully clockwise to hear the
sound of a tape machine in
need of service. In between
the extreme settings, a
natural tape modulation is
achieved.
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
push (bank / time)
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
TIPS & TRICKS: Reduce the Repeats knob if necessary when
using minimum bias to tame the regenerative high frequencies.
TIPS & TRICKS: The mechanical
effects of wow/fl utter and tape
crinkle will track to the Tape Speed
parameter. Select FAST for higher
fi delity, including wider playback
head frequency response. Select
NORMAL for a warmer tape sound.
High SPEED and DEPTH knob settings
(tape crinkle and wow/fl utter) with
NORMAL Tape Speed will produce the
characteristics of an old un-serviced
tape machine.