User Manual

TimeLine - User Manual
®
pg 14
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
BANK / TIME
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
Delay Machines: Swell
A variable attack time delay that can swell into notes or chords. This can create atmosphere and ambience in a subtle and
stealthy manner.
PARAMETERS:
Smear: Softens the attack of the repeats while maintaining full frequency response. This
allows for higher mix levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal gets dreamy and ethereal.
OFF
|||||||||
High Pass: Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
0.10
0.15
0.20
0.25
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
1.10
1.20
1.30
1.40
Rise Time: Sets the time constant of the ramp input to the delay. The display indicates the
ramp time in seconds. Try setting the ramp time to about the same value as the
delay time for natural swell effects.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
120Hz
140Hz
160Hz
180Hz
200Hz
230Hz
260Hz
300Hz
350Hz
400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
1.50
1.60
1.70
1.80
1.90
2.00
2.20
2.40
2.60
2.80
3.00
4.00
TIPS & TRICKS: Set the RISE param to match the delay time for natural swell-meets-delay effects. Turn the MIX fully
CW for volume-pedal swell effects.