User Manual

Riverside - Multistage Drive
®
pg 7
Bypass Mode Selection
Press and hold the ON footswitch while
powering up the pedal.
Press the ON or FAVORITE footswitch to store
The Bypass mode and begin using Riverside.
1
3
Turn the LEVEL knob to select True Bypass or
Buffered Bypass
2
GREEN (LEFT) - True Bypass (default)
RED (RIGHT) - Buffered bypass.
Using Buffered Bypass allows Volume Mode
and Boost Switch Mode.
Setting Riverside to Buffered Bypass mode preserves the high frequency response
of your guitar signal through your pedal chain and long cable runs.