User Manual

Riverside - Multistage Drive
®
pg 3
Rear Panel
• POWER
Use an adapter with the following rating:
9VDC center negative. 250mA minimum.
• PRESENCE SWITCH
Tailors the top end character of the output
to match your amp. Try minus (-) or center
in front of an amp. Try plus (+) when
plugging straight into a power amp.
• BOOST
Boost Switch Mode - Use an external Favorite
switch to toggle up to +6dB of post boost on/off
(See page 8 for setup).
Favorite Output Mode – Connect to the EXP input
of another Strymon pedal set to work in Favorite
EXP mode to toggle the Favorite setting of that
pedal with the on-board FAVORITE switch (See
page 8 for setup).
• EXP
Can be used in one of two ways with a standard
TRS expression pedal:
Expression Pedal Mode – Allows continuous
control over any of the knobs (See page 11 for
more info).
Volume Mode – Allows control of the output
volume of the effect (See page 11 for more info).
• IN
Mono instrument input.
• OUT
Mono signal output.